kaolin grinding equipment video

Release date: 2022-06-29

The video of kaolin powder grinding equipment is the mechanical operation video of the purchase of Guilin Hongcheng HLMX ultrafine vertical mill to produce ultra-fine kaolin powder.

HLMX ultrafine vertical mill case site, welcome to leave a message or consult [email protected]

HLMX ultrafine vertical mill is a machine for producing ultra-fine powder. It is an environmentally friendly and energy-saving equipment developed and produced to adapt to the high-end powder application field. The production capacity of this equipment can be adjusted, with small and large volumes. It can process 1.2~45 tons of minerals per hour, and the fineness of the powder is 45um-7um, and the secondary classification can reach 3um.

Advantages of HLMX Ultrafine Vertical Mill

1. High output per hour, low power consumption, low energy consumption, and low valley electricity can be used.

2. The control technology adopts PLC automatic control system, which has a high degree of automation and can realize remote control of video monitoring. It is easy to operate, and the workshop can basically realize unmanned operation, saving operating costs.

3. The grinding spokes can be turned out of the machine with a turning device, the replacement of the rolling bushings and the maintenance space of the mill are large, and the maintenance work is very convenient; troubles.

5. The process operation is simple, preheating, grinding, and lifting are integrated, the process is short, and the area is small.

6. Strong self-protection, equipped with auxiliary facilities such as reducer thin oil station, hydraulic station, grinding and rolling lubrication, water spray device.

7. Material grinding is carried out under variable pressure.

8. Dynamic and static powder selection adjusts product quality and has higher grinding efficiency.

9. Small maintenance, small wear parts, easy maintenance.

10. The vertical mill is provided with a slag discharge port in the lower shell, and the hard-to-grind foreign matter can be discharged out of the machine at any time, and the remainder can also be completely emptied after shutdown.

11. The grinding spokes can be turned out of the mill for maintenance by means of the hydraulic turn-over device, and it only takes 12-24 hours to replace the easy-to-wear parts, which improves the operation rate of the mill.

12. The arc-shaped plate sealing structure is adopted between the grinding roller and the shell, which has the characteristics of good sealing effect and durability compared with the traditional structure.

13. The product quality is stable, the product particle shape is uniform, and the particle size distribution is narrow.

Get Price And Support